ESPHOME OLED

esphome:
  name: oled_screen_spi
  platform: ESP8266
  board: nodemcuv2

wifi:
  ssid: 
  password: "

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Oled Screen Fallback Hotspot"
    password: 

captive_portal:

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:
    
sensor:
  - platform: homeassistant
    id: kitchen_temperature
    entity_id: sensor.front_door_multisensor_temperature
    internal: true

  - platform: homeassistant
    id: kitchen_humidity
    entity_id: sensor.front_door_multisensor_humidity
    internal: true

font:
  - file: "Comic Sans MS.ttf"
    id: my_font
    size: 9
    
time:
  - platform: homeassistant
    id: esptime
spi:
  clk_pin: D0
  mosi_pin: D1



display:
  - platform: ssd1306_spi
    model: "SSD1306 128x64"
    cs_pin: D2
    dc_pin: D3
    reset_pin: D4
    lambda: |-
      // Print "Mitt Smarta Hus" in top center.
      it.printf(64, 0, id(my_font), TextAlign::TOP_CENTER, "WILDING HOME");

      // Print time in HH:MM format
      it.strftime(0, 60, id(my_font), TextAlign::BASELINE_LEFT, "%H:%M", id(esptime).now());

      // Print kitchen_temperature(from homeassistant sensor)
      if (id(kitchen_temperature).has_state()) {
        it.printf(127, 23, id(my_font), TextAlign::TOP_RIGHT , "%.1f°", id(kitchen_temperature).state);
      }

      // Print outside temperature (from homeassistant sensor)
      if (id(kitchen_humidity).has_state()) {
        it.printf(127, 60, id(my_font), TextAlign::BASELINE_RIGHT , "%.1f°", id(kitchen_humidity).state);
      }

About the Author

Leave a Reply

Your email address will not be published. Required fields are marked *